Lighting Sensors

Cannon Cabinet Swipe Sensor Switch

  • Can be used with 12V & 24V products (without an integrated sensor).
  • Works as an on/off switch for these fittings.
  • Mount inside a cabinet - open door to activate light.
  • Mount under cabinet - lights are activated when a hand passes before the sensor.
  • 5cm detection range, so unwanted detection is avoided.
  • Can be surface mounted or recessed into a pelmet.
  • Plug and play: no additional wiring is required by the electrician.
  • JB4 Distribution block supplied.
  • Supplied with a 1.5 metre cable.
CodeDescription 
SE40516
68122
Sensio Cannon Cabinet / Swipe Sensor Switch for 12V and 24V product
Sensio Cannon Cabinet / Swipe Sensor Switch for 12V and 24V product£17.24  ex vat

Moda LED Dimming Sensor Switch

  • Multi-functional product; use as a dimmer, on/off switch or in-cabinet on/off switch.
  • Use with any 12V or 24V Sensio product (without an integrated sensor).
  • Aluminium effect finish to match many of our best selling products.
  • 5cm detection range.
  • Plug and play, and no additional wiring is required by the electrician.
  • JB4 Distribution block supplied.
  • Supplied with a 1.5 metre cable.
CodeDescription 
SE40520
57271
Sensio Moda Sensio LED Dimming On/Off Switch Aluminium
Sensio Moda Sensio LED Dimming On/Off Switch Aluminium£17.47  ex vat

Infra-Red Swipe Sensor Switch

  • Maximum detection range: 5-10cm.
  • Swipe hand past the sensor to activate lights.
  • Can be used with; 12V, 24V or 240V fittings.
  • Suitable to use with the majority of Sensio fittings.
  • The motion sensor detects body heat motion and automatically switches the lights on or off.
  • High wattage of 250W means the sensor will run a large number of fittings.
  • Discreet fitting, sits almost flush with a cut-out of only 13mm.
  • Supplied with a 2.0 metre cable.
CodeDescription 
SE40517
65474
Sensio 250w Infra Red Swipe Sensor Switch
Sensio 250w Infra Red Swipe Sensor Switch£23.01  ex vat

In-Cabinet IR Door Sensor Switch

  • Detection range of 5-10cm. Recess into internal shelves in wall units or wardrobes.
  • Can be used with; 12V, 24V or 240V fittings which do not have an integrated switch or sensor.
  • High wattage of 250W means the sensor will run a large number fittings.
  • All connected lights will switch on once the door opens as the sensor detects that the door is no longer blocking its path and they'll be switched off once the door is closed.
  • Very discreet switching option, ideal for darker furniture.
  • Supplied with a 2.0 metre cable.
CodeDescription 
SE40518
20163
Sensio 250w Infra Red In Cabinet Door Sensor Switch
Sensio 250w Infra Red In Cabinet Door Sensor Switch£21.70  ex vat

In Cabinet PIR Sensor Switch

  • Discreet in-cabinet motion sensor switch
  • Works as on/off switch for lighting installed inside cabinets or wardrobes
  • Mount in a side panel or back panel of an internal unit
  • Dial on front of sensor allows user to select how long the lights will stay on for (from 10 seconds to 3 minutes)
  • Detection range - 0.5m-2.5m
  • 80° detection angle
  • Discreet fitting
  • Does not require a JB4 connector
  • Compatible with 12V, 24V & 240V products
CodeDescription 
SE40515
51927
Motion sensor switch 250W
Motion sensor switch 250W£23.49  ex vat
8am-5pm, Monday - Friday
Hill's Panel Products Ltd. | Scottfield Road | Oldham | Lancs | OL8 1LA | United Kingdom
Copyright © 2012-2019 Hill's Panel Products Ltd. All Rights Reserved.
Product Information Tool Close
Content
-
CLOSE